Vent-Axia - Heating, Ventilation and Air Conditioning
HomeAbout UsWhat's NewOur ProductsFan SelectorBuying ProductsKnowledge CentreContact Us

 Product Search:
 

 
Our Products

  Vent-Axia Lo-Carbon Ventilation Range
 
 Domestic Ventilation Product Range
 Commercial Ventilation Product Range
 Vent-Axia Industrial Product Range
 Roof Units Product Range
 Sentinel Demand Ventilation
 Sentinel Totus Demand Energy Recovery Ventilation
 Heat Recovery & Mechanical Extract Systems
 Commercial Air Curtains
 Smoke Fans Range Guide
 Vent-Axia Air Handling
 Vent-Axia Cooling Range
 Vent-Axia Heating Range
 Hygiene Product Range
 Sensors, Controllers & Accessories

Online Shopping

Catalogue Request

LinX Contractor Range

 Route: Our Products \ Vent-Axia Clean Air Systems \ Padova System Cooker Hood

Padova Cooker Hood
Padova Cooker Hood
 Model Stock Ref No
 Padova 43 10 14
 EXT100 - External Wall fan 43 16 05

Overview
A 600mm built under unit, designed to be mounted under a kitchen cupboard or simply mounted above a hob. The unit has a 125mm spigot that can be connected to an external wall fan or a Multivent system.Two control switches on the front face of the unit switch on a light and the small 90m³/h fan inside the units which creates the air curtain that surrounds the cooking area, preventing smells and steam from circulating around the kitchen. At the rear of the unit is a manual sliding switch for opening and closing the duct to atmosphere. During cooking the sliding switch must be in the open position.

The external wall fan has a 100mm Ø spigot and can be mounted on the external wall and connected to the System Cooker Hood using 100mm aluminium ducting. The external wall fan can be activated using a fused switch mounted inside the kitchen.

back to top

Dimensions (mm)

Padova Dimensions

back to top

Typical Specification
Supply and install a Padova System Cooker Hood as supplied by:

Vent-Axia Clean Air Systems
Fleming Way
Crawley
West Sussex
RH10 9YX

Performance: m³/h l/s
Internal motor to create air curtain 90 25

Motor: Asynchronous induction motor with screened poles and thermal protection. Rotor placed on self-lubricating brasses. Motor working with 230Vac, 50Hz at a maximum room temperature of 45°C.

Fan: Centrifugal fan made of thermoplastic, self-extinguishing material V2.

Controls: The appliance is equipped with push buttons for switching on the motor and the lights. There is also a warning light for indicating the motor functioning.

Ducting spigots: The appliance is equipped with a 125mm Ø exhaust connection, to which the ducting spigot shall be connected with.

Filter: Anodised aluminium filters composed of: Five filtering layers made of anodised aluminium net. Fat absorbing capacity of 75,8% at 572m³/h and 65Pa, in accordance with CEI EN 61591. Anodised aluminium frame. Spring handle made of metal and heat resistant thermoplastic and self-extinguishing material.

Construction: External body made of stainless steel plate AISI 304. Internal parts made of galvanised plate and painted plate.

Sound Levels: Appliance noise level not higher than 44 dB(A) @ 3m.

Mains electrical supply: 230VAC 50Hz.

Power Consumption: 70W.

Complies to the following approvals/directives: CE.

back to top

Vent-Axia Clean Air Systems
Information:

»Overview
»Dimensions
»Typical Specification
 
Downloads:
PDF availableCatalogue Pages
PDF file - 86kb
13s @ 56Kbps
PDF availableO&M Instructions
PDF file - 486kb
26s @ 56Kbps
 
Features & Benefits:
General Ventilation
Condensation Control
Noise Ingress
Air Circulation
Controllability

Integral fan that creates an air curtain around the cooking area

Air curtain allows 80-90% of all cooking fumes to be extracted, opposed to the 35% traditional cooker hoods allow

External fan reduces noise within the kitchen

Can be used with an external wall fan or with a Multivent system

Unit is pre-wired with 1m long flying lead fitted with a moulded 13 amp plug


  [ HOME | TOP ]  
 © Copyright 2007, Vent-Axia Ltd